Application
Especially suitable for food, medical packaging materials marking, and other applications.

Usage method
If there is a sudden blackout in operation, please press the red button immediately, and switch the switch to the position of shutting or stopping one by one, or adjust the laser power supply current regulation knob to the lowest position.The equipment should be stopped and reported in time when the equipment is abnormalThe equipment shall establish the relevant maintenance and maintenance records of the equipment and record all the contents of the inspection and maintenance.

Product features

Compared with the infrared laser, 355 UV light spot is very small. It can largely reduce the mechanical deformation of materials and make less thermal influence, because it is mainly used for hyperfine marking and carving.

FAQ

Do not do this when the UV marking machine is cleaning the lens.

1. mirror directly touching the hard surfaces; 2. to hand touch the mirror; 3. non lens paper (bar) rtgwt_4n wipe or wipe the lens 3D dynamic scanning system; 4. and when the lens is pressed hard UV marking machine optical path adjustment process; 5. to mirror air compressor air or steam note: gas injection laser lens must be carefully wipe

Design feature

Based on the above cold processing, the effect of raw materials will get better effect, better development, when using cold laser processing, the probability of material influence has been reduced to one percent, so that the advantages of the process are all used, is also a major upgrade of laser technology,

Product features

UV laser marking machine is a series of products of laser marking machine, but it is developed by using 355nm ultraviolet laser. The machine adopts three order intracavity frequency doubling technology