7000Mm Marking Speed Fast Speed Marking Desktop Laser Engraver
Manufacturers
Working principle
Laser fiber laser marking machine has a high energy density of the
laser beam, the surface of the material being irradiated, the laser
energy absorbed by the surface of the material, heat excitation
process in the irradiated area, so that the material surface (or
coating) temperature rise, resulting Metamorphosis, melting,
ablation, evaporation and so on
Fiber laser marking machine parameter
Laser power | 10W/20/30/50W |
| Laser Wavelength | 1064nm |
| Light beam quality | <2 |
| Repeating precision | ±0.002 |
| Marking range | 110x110mm(customize) |
| Marking depth | 0.01~1mm |
| Marking speed | 7000mm/s |
| Minimum character | 0.15mm |
| Minimum line width | 0.01mm |
| Repeating frequency | 20KHz~30KHz |
| Marking content | Graphics, text, bar codes, two-dimensional code, date, batch number, serial number |
| Graphic format supported | bmp,png,ai,dxf,dst,plt |
| 220V±10%/50Hz/4A |
| Size | 570mmx270mmx200mm |
| Gross Weight | 135kg |
| Control interface | standard USB port |
| Laser module life | 100000~200000 hours |
Application
Fiber laser marking machine marking sample
At present, laser marking has been more and more widely used in 3C
industry. Especially with the maturity of fiber laser marking
technology nowadays, the performance of fiber laser marking machine
in the field of 3C is also more and more outstanding. Performance
advantages are becoming an important way to mark the processing of
3C industry. 3C products include computers, tablets, mobile phones,
digital cameras and more.
Usage method
Requirements Working environment (room temperature) Temperature at
18 C -28 C (25 C is the best)
b. It is forbidden to start the laser power supply and Q drive
without water or abnormal circulation
c. Abnormal phenomenon, first turn off the laser power and
galvanometer power, check again
e. Do not allow other components to be started before the krypton
lamp is ignited to prevent the high voltage from entering the
damaged component
f. laser power output does not allow (anode) is vacant to prevent
sparking with other electrical appliances, breakdown
g. Keep the circulating water clean, clean the water tank regularly
and replace the pure water.
Product features
The so-called fiber laser marking machine is the type of marking
machine using a fiber laser, fiber laser with a small size (no
water cooling device, the use of air-cooled), good beam quality
(basic mode), maintenance-free features. Today's fiber optic
equipment can not only reduce maintenance costs, but also the
service life has been greatly extended, marking the effect compared
with the original more detailed and clear
FAQ
laser marking machine how to maintain? Equipment shall not have
other debris, the surface of the equipment should be kept clean,
the production operator should strictly follow the standard
operating procedures for production and operation, non-random
operation, equipment, circuit must be grounded to protect the
personal safety, preparation and shutdown should be strictly
followed open , Shutdown procedures, non-free operation and so on
Design feature
With the third generation of fiber-optic solid-state lasers, the
pump light source is coupled through a fiber and the
electro-optical conversion efficiency is as high as 80%. The beam
quality is higher and the lifetime is longer. The lifetime of the
laser can reach 100,000 hours. The air-cooled, Energy saving, the
late use of low cost
Product features
Fiber laser marking machine with a high degree of automation, high
efficiency, wide range of applications and other performance
advantages. Laser cutting plotter equipment used in the processing
of the "tool" is a laser beam, laser engraving machine with no
wear, non-contact, selective processing, heat-affected area is
small, high precision and high repetition rate of processing
flexibility, etc. Standard processing known as "the mark will never
disappear." Because the laser marking process is not processed
directly contact with the product. In addition to the cutting
process in the cutting force on the workpiece has no effect,
processing speed, no noise, no pollution, laser cutting plotter to
achieve "green processing" requirements.
Packing and shipping
Packing in wooden case,95*81*122cm The machine gross is 1-188KG,
you can use express delivery. If more than 75KG, you can choose sea
transportation.
Aftersale service
1.3 year guarantee,providing free technical support.
2.During the warranty period, Warranty period, the required parts
after the non-human damage free replacement,the freight is borne by
us.
3.Machine has been adjusted before delivery, operation instructions
is included in the delivery. If there is any other questions, pls
kindly tell us.
Chuke Factory
Chuke is a famous brand of marking machine in China. Zixu Machinery
Factory is one of the largest production bases for marking needles
in China. The company is located in Beibei District, Chongqing City
and was established in 2006. In addition to producing pneumatic
marking needles, the company also autonomously R & D laser marking
machine, pneumatic marking machine, marking machine, and its
accessories.Purple Asahi Machinery Factory is a technology,
industry and trade companies, enterprises contract and keeping
promises. The company's existing production and sales of more than
60 people, 10 were in professional and technical workers, the
company occupies 3,000 square meters, with large-scale production
of complete sets of equipment, marking machine design, manufacture,
quality inspection, performance testing with strong technical force
and production capacity.
Set all kinds of professional and technical elite, with the marking
machine industry-leading technical force, purple Xu so that each
marking machine to do fine, fine, new standards, only one thing to
do 10 years, focusing on marking machines and The production of its
accessories.
